Component Part Number Radar

Selected PN

M55342_ _ _ _ _ _ _

Format: Model + TCR + Case + Term + ValueCode + FR + Pack + ThinFilm

Filters

Current Family

M55342 / D55342

QPL MIL-PRF-55342 qualified thin film surface-mount resistor family (Vishay E/H series).

Built for stringent stability/noise requirements: sputtered wraparound terminations, low voltage coefficient, non-inductive behavior, and established reliability screening.

Intended for military/aerospace high-reliability resistor networks and precision analog/digital assemblies.

Model

TCR Code

Case Size / Slash

Termination

Resistance Input (Ohms)

Select a resistance mantissa pill. Non-preferred values for the selected tolerance are highlighted.

MIL value check: waiting for tolerance letter selection.

Tolerance / Multiplier Letter Code

MIL Value/Tolerance Table Used For Check

Tolerance	Series	Allowed 3-digit Mantissas
0.1%, 0.25%, 0.5%, 1%	E96	100..976 preferred set
2%, 5%	E24	100..910 preferred set
10%	E12	100..820 preferred set

Failure Rate Code

Packaging

Thin Film Code

Letter set included: A B C, R U V, W Y Z, D E F, G H T, J K L, M N P.

Remaining Part Numbers

Ready 0 matches

Selected PN

WSL25124L000FEA

Format: WSL + Size + Value(5) + Tolerance + Packaging + Special(optional)

WSL Filters

Current Family

WSL Power Metal Strip®

All-welded low-value current-sense resistor family with sulfur-resistant construction, low thermal EMF (< 3 µV/°C), and very low inductance (about 0.5 nH to 5 nH).

Datasheet positioning: current sensing / voltage division / pulse handling; resistance range extends down to 0.0005 Ω with AEC-Q200 qualified variants.

Model

Resistance Value Code (5 chars)

Use Vishay 5-character code. For values below 0.01 Ω, use L format (example: 4L000 = 0.004 Ω).

Tolerance Code

Packaging Code

Special Dash Number (optional)

Optional customization code from 1 to 99 per Vishay global part-numbering format.

WSL Results

Code-builder mode 1 result

Selected PN

WSC2515R7000FEA

Format: WSC/WSN + Size + Value(5) + Tolerance + Packaging + Special(optional)

WSC / WSN Filters

Current Family

WSC / WSN Precision Power Wirewound

All-welded precision power wirewound family with molded encapsulation and wraparound terminations, intended for high-power/surge-tolerant surface-mount use (up to 3 W).

WSN variants use Ayrton-Perry non-inductive winding; datasheet states WSN maximum resistance is one-half of the equivalent WSC range.

Historical model WSC0001 is retained for decode/build compatibility and maps to the same 2515 footprint class documented as replaced by WSC2515.

Style

Size / Power

Resistance Value Code (5 chars)

Use R or K format (example: R7000 = 0.7000 Ω, 1K500 = 1.5 kΩ).

Tolerance Code

Packaging Code

Special Dash Number (optional)

Optional customization code from 1 to 99 per Vishay global part-numbering format.

WSC / WSN Results

Code-builder mode 1 result

Selected PN

T502-?-???-?-??-??

Prototype format: Series + Case + CapCode + Tol + Voltage + Pack

T502 Filters

Current Family

T502 MnO2 230C

High-temperature molded tantalum chip capacitor family (up to +230C operating capability).

Differentiators include 100% SBDS screening, 3-sigma screening for iL/DF/ESR, and qualification at 1,000 h life test at 230C (0.33 Vr).

Typical use is decoupling and filtering in very high-temperature electronics, including down-hole MWD measurement systems.

Series

T502

T502 case set uses B/C/D molded tantalum outlines.

Case

Capacitance (uF)

Select capacitance from table options.

Voltage

Tolerance Selection

Replaces (1). Allowed: K = ±10%, M = ±20% (capacitance tolerance designator).

Surge Current Testing

Replaces (2). Allowed: 61 = No additional surge current testing, 62 = 10 cycles at 25°C ±5°C (after Weibull), 63 = 10 cycles at -55°C ±5°C and +85°C ±5°C (after Weibull).

T502 Results

Prototype generator active 1 result

Available Parts Table

Selected PN

T54x-?-?-???-?-???-?-?-??-??-PACK

Format: T + Series + Case + CapCode + Tol + Voltage + Failure + Term + Surge + ESR + Packaging

T540 / T541 Filters

Current Family

T540 / T541 KO-CAP HRA

Hi-rel conductive-polymer tantalum family focused on very low ESR and strong high-frequency capacitance retention.

Series benefits include DLA drawing support, surge-screening options, low ESR values (down to 5 mOhm), and failure-rate options under KEMET KO-CAP reliability assessment methods.

Used where polymer tantalum efficiency and ripple capability are needed in high-reliability power rails and converter stages.

Series

Case Size

Capacitance Code (pF)

Use 3 digits: first 2 are significant, 3rd is number of zeros (e.g., 106).

Capacitance Tolerance

Rated Voltage (VDC)

Failure Rate / Design

Termination Finish

Surge Current Option

ESR

Packaging (C-Spec)

T540 / T541 Results

Code-builder mode 1 result

Available Parts Table

Selected PN

G311P829-?-?-?-???-?-?-?-?

Format: GSFC + Ultrasonic + Size + Dielectric + CapCode + Tol + Volt + Term + Pack

S-311-P-829 Filters

Current Family

S-311-P-829 (GSFC PIN)

NASA high-reliability multilayer ceramic capacitor specification for space, missile, and other flight-grade programs.

The spec defines qualification and test controls for extended-range capacitors used in very low-power, low-voltage flight assemblies; compatible S311-P838 BME X7R derivatives add higher CV and weight/area reduction benefits.

Intended for mission-critical avionics/space electronics where qualification pedigree and traceability are mandatory.

GSFC Identifier

G311P829

Ultrasonic Examination

Size Code

Dielectric Type

Capacitance Code

Use a 3-character code: 3 digits for >=10 pF (e.g. 100=10 pF), or R-format for <10 pF (e.g. 1R0, R75, 0R5). Pills provide datasheet-valid quick picks with value labels.

Tolerance

Voltage (Vdc)

Termination

Packaging / Marking

S311-P838 Preferred Sizes

Preferred sizes are shaded (from AVX S311-P838 table). Click a highlighted cell to apply cap/size/voltage.

S-311-P-829 Results

Rule-based mapping 0 results

Selected PN

M32535??????????

Format: M32535 + Slash + Characteristic + Voltage + Cap + Tol + Term + Level + Electrode

M32535 Filters

Current Family

M32535 (MIL-PRF-32535)

Military ceramic chip capacitor family with C0G/BP and X7R characteristic options under slash-sheet case control.

Supports established/non-established reliability levels with explicit termination, voltage, tolerance, and dielectric coding in the PN body.

Typical applications include avionics, defense, and high-reliability electronics requiring MIL-style traceable part-number coding.

Slash Sheet / Case

Characteristic

Rated Voltage Code

Capacitance Code

Use R-format for 1.0 pF to 9.9 pF on C0G/BP (for example 2R2), or 3-digit code (for example 103).

Tolerance Code

Termination Finish

Product Level

Electrode

M32535 Results

Code-builder mode 1 result

Selected PN

SGIHLP60HEB4R7M81S

Format: SGIHLP + Size + Package + L Code + Tol + Family + Screening

SGIHLP Filters

Current Family

SGIHLP Space Grade

MIL-STD-981 class S compliant IHLP inductor family for high-current space-grade power conversion.

Key traits are shielded construction, high-temperature capability (up to 180C), low DCR per uH in package class, and robust transient-current saturation handling.

Target applications include POL converters, distributed DC/DC systems, low-profile high-current supplies, and solar power converters.

Size

Package

Inductance Code (uH)

Pick a code pill (examples: R22, 4R7, 101).

Tolerance

Screening

SGIHLP Results

Code-builder mode 1 result

Selected PN

SGTPL2516T02812S

Format: SGTPL + 25 + Height + T + 028 + Output + Screening

SGTPL-28 Filters

Current Family

SGTPL-28 Space Grade Planar Transformer

SGTPL naming appears in two Vishay datasheets: SGTPL-28 (doc 34647) and SGTPL-2516 (doc 34585).

Builder mode supports only published standard rows from those datasheets and flags non-listed combinations.

Legacy/custom dash-format strings (for example SGTPL-2013-0021E) can exist but are not listed standard catalog rows in these two datasheets.

Series Variant

Series

SGTPL

Footprint Code

25 (25 mm x 25 mm)

Mounting Style

Input Voltage Spec

028 (28 V nominal)

Height Code

Output Voltage Spec

Design Code

Screening Code

Screening options depend on selected variant.

SGTPL-28 Results

Code-builder mode 1 result

Selected PN

JANS1N4104

MIL diode format: quality + base type + optional suffixes

Diode Builder

Current Family

1N4099-1N4135 / 1N4614-1N4627

500 mW zener voltage regulator family (Microchip 00006237A)

High-reliability zener series spanning 1.8 V to 100 V; each device number maps to a unique VZ nominal point (IZT=250 uA).

Built for precision voltage regulation/reference over broad current and temperature ranges, with MIL JAN/JANTX/JANTXV/JANS quality flow and optional suffix controls.

Datasheet Family

Device Type Number

Device number selects the family electrical target per datasheet tables.

Quality Prefix

Tolerance Suffix

Package Suffix

Bond Suffix

Compliance Suffix

Diode Results

Code-builder mode 1 result

PN Decipher

Paste a part number to decode attributes.

Family auto-detected by PN format rules.

PN Input

Part Number

Family is auto-detected. If detection is unclear, decode is withheld and flagged.

Decoded Attributes

Waiting for input No result

Detected Family: -

Normalized PN: -

BOM Decipher

Upload CSV/TSV BOM to decode PN attributes.

Table view (left) + selected-row attributes (right).

BOM Table

CSV / TSV Upload

PN Column

No BOM loaded.

Selected Row Attributes

Waiting for BOM row selection Row -

Row PN: -

Family Override

Distributor Availability

Select a BOM row to load DigiKey and Mouser availability.

What would you like to do?

Pick component type

Pick the browser family

Request A New Part

Part Request Form

Remaining Part Numbers

WSL Results

WSC / WSN Results

T502 Results

T540 / T541 Results

S-311-P-829 Results

M32535 Results

SGIHLP Results

SGTPL-28 Results

Diode Results

Decoded Attributes

BOM Table

Selected Row Attributes